Any tried doing this on a talon ? I was thinking of mounting Go pro or maybe even a light.
Webp.net-resizeimage (2).jpg
Any tried doing this on a talon ? I was thinking of mounting Go pro or maybe even a light.
Webp.net-resizeimage (2).jpg
someone sells lights for the top of talons
2022 z519 cup 225 merc 4s ser # 3B210484. 2--hds12 live units. 2 poles, atlas plate, ghost, hamby's, active target, merc digital gauges
2002 basscat pantera 3 (dad bought new) sold 8-2-22
2000 stratos 20 ss (bought new) 200 hp Rude ficht great boat/motor sold 11-21
pulled by a 2500HD Denali
proud dad of an ARMY Captain
MAGA
ASE/GM Master tech before tools
Russell Marine Products sell lights for Talons. I bought one and it works great!
https://www.russellmarineproducts.co...alon-s/562.htm
2005 Champion 198 DC Elite
2005 Mercury Optimax-225hp (Serial#1B073011)
That's a cool idea for a universal mount. You could rig it to hold a light and a gopro together
I took this idea a little further. I am thinking about getting a dual GoPro Mount and then actually adding the little $50 yolotek light.20200108_161203-907x1612.jpg
How is it attached?
That's what I want to know, how its attached to the Talon. I have the Yolo but would be nice to have the set up on the Talon, or heck even both....One forward and one looking back.
Jimmy
Phoenix 721
12" Bobs Hydro Plate
Mercury 300 Xs
Dave Bush Racing Kit
28.5 Bravo
I use this Mount along with 3 washers. 1 stainless steel and one rubber on the inside and one rubber on the outside. The T slot works great but needs the washers to help hold it and it fits perfectly in the slot allowed in the Talon for adjustment. And it will slide up and down you just tighten it up and it will stay in place works pretty good.
RAM Track Ball with T-Bolt Attachment https://www.amazon.com/dp/B00FE66K86..._unOiEbKTNP6SN
I did have to install it from the top down so I had to take off the top cap. Then I slid down and place and replace the cap. I've even added power in the slot so has its own power from the battery inside the boat.
Thanks for the idea. They don’t have a lighted cap for the gen 1 so I Installed an extra stern light yesterday.
nice