I just removed the Ultrex from my 21 PHX and replaced it with a Ghost. The MinnKota puck was installed behind the drivers seat and now I have this ugly place on the carpet with a 1/2” hole in the middle! Looking for some good ideas on what to cover the old puck location. Anybody got any.
Last edited by ppcshooter; 12-17-2019 at 01:57 PM.
Why did you replace the ultrex ?
FX20
Interface with my
Lowrance Carbons was the primary reason.
I always just put an old gps puck over the hole and nobody will know it’s not functional.
What about a cock hole cover?
CFD9E0D0-C4B2-4D94-8F0D-ED82BE85293C.jpeg
. I would if I had one, lol.Originally Posted by BigBrownBass
Put the ghost puck in the same spot.
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
Cable is about 12 feet too short
Phoenix 21PHX, Yamaha 250 SHO. Lowrance Carbons
Get a cable extension
Just recently someone removed their remote oil tank and wanted to take out the cap on back deck. Drew had a round chrome bird cover for it..cant find the post but hopefully he will post on here.
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
Get a rubber stopper from Lowes...the surrounding area depression will go away over time
2019 721 ProXs 4S 250
2B599739
PP foot buttons
Why put power pole buttons behind the driver seat?
Put a USB port in
2014 Phoenix 721
250 SHO
remote plug switch
Use a pedestal seat plug from Bobs Machine. Sits flush and can be done to match carpet. Also has the rubber ring to keep water seepage out. May have to make the hole a little bigger though.
Contact a TM repair shop or ask on here. Chances are someone has a bad one laying around.
I'll take your ultrex if you don't want it anymore.
Alex Darsen - 2013 Phoenix 920/Mercury 250 ProXS
Fishing is not a matter of life or death.
It's more serious than that!
Reply With Quote
