Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Nov 2006
    Location
    Winter Haven Fl.
    Posts
    225

    Trim/Tilt problem

    2008 Etec 225Hp. Trims up fine but won't trim back down always. It is intermittent. Sometimes just starting the motor and moving boat and it will start to work sometimes not. sometimes for no reason it will start to work. When I get home and take the cowling off it always works. ( figures). when it dosesn't work, it doesn't work from all three switches on the boat. Bow, Shift lever and motor itself. What do you think I should do next?

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,246
    #2
    May have to replace the relay. Check the connections at the motor, try unplugging and plugging back in.

  3. Member
    Join Date
    Nov 2006
    Location
    Winter Haven Fl.
    Posts
    225
    #3
    Thanks. that's what I figured. Just want to make sure I get the right one.

  4. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    71,246
    #4
    there is only one relay for your motor.

  5. Member
    Join Date
    Nov 2006
    Location
    Winter Haven Fl.
    Posts
    225
    #5
    Thanks