-
Looking for a good 2.5L Merc mechanic
I have a 1999 Mercury 200hp EFI that I’m having some problems with and I’ve done all the troubleshooting on it that I know how to do. Ive been told I need to have the ignition system tested with a DVA tester and I’d like to take it to someone who knows the 2.5L EFI outboards well. Anyone have any suggestions for someone to take it to in Northeastern North Carolina near Roanoke Rapids? Thanks in advance.
Michael
-
Mercury 3L/4 Stroke/Verado Moderator
Michael- Welcome to BBC!
If you would, take a moment to review the Announcements at the top of the Forum, and be sure to provide the Required Info (Serial Number) when posting. Thanks!
Have you tried the Mercury Dealer Locator?
https://www.mercurymarine.com/en/us/find-a-dealer/
-
Member
It would be a little drive but R&K in Knightdale would be a good choice. Great Merc mechanic for lots of years. Good Luck
-
Sorry about not posting the serial number and thanks for the welcome. I’ll check out the dealer located and look into R&K. Knightdale isn’t too bad of a drive. Thanks for the reply’s!
-
Buckhorn Marine is good also , on hwy 42 in Wilson .
-
Sorry it is named BuckHorn Boat Dock on hwy 42 right off #95
-
Member
How far are you from Greenville, SC? There is a REALLY GOOD, HONEST dealer there...
Last edited by 06 SB; 12-15-2019 at 08:43 AM.
USN Retired
2020 Basscat Caracal
2020 Mercury 225 ProXS 4s
-
Wilson’s not far from here. I’ll have to check that one out as well. Greenville SC is a little further than I was hoping to go but thanks for the recommendation.
-
Greenville might be a little further, but Don Weed (EuropeanAM) is the REALLY GOOD, HONEST dealer 06 was referring to.
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
-
Davesboatservice.com He's not too far from Roanoke Rapids.
-
I have wished many times I lived close to Don or Joe.
-
Don Weed would be my choice !!!
-
BTW , the label on bottom of my posts info is wrong haven’t been there for 6 years :
JSRE
181 Dagger Drive
Brookeland , Texas 75931
832 597 2603 cst M-T