I recently had to unscrew and remove the spa
splashwell access panel in my Z520C in order to access my powerpole pumps. Should I be caulking/ sealing it when I put it back on? I seem to be taking in some water, not sure if it’s from there or somewhere else.
Thanks for your help.
There should be a this seal already in place. I had the same issue and the screws had stripped out. I replaced with bigger screws. I still had a leak and found the black silicone between the top cap and hull directly in front of the motor was the real leak. I loosened up the top motor bolts top the black trim off and resealed it. Problem is now fixed.
Gun Control..... Is hitting your target every time
A little silicone sealant never hurts.
John Clark — Findlay, Ohio
Reply With Quote