I took my boat out yesterday to test my new Ghost trolling motor and Livesight transducer. Very pleased with the Ghost. More powerful, quieter and overall performance was much improved from my Ultrex. Livesight was another story. My HDS Live initialized the Livesight and things seemed to work ok on pallet 1. Went back to downscan for about an hour. I decided to go to a bridge and look at the pilings with Livesight. After activating Livesight, cross track and depth readings came up, but I no longer had pallet 1 displaying. The screen was black. Every 10 seconds or so, you could see the HDS was attempting to collect RT images. Nothing showed up. Changed channels to no avail. During my trouble shooting on the water I tried to change frequencies, pallets and other things thinking it could be an operator setup issue. Nothing worked.Could this be a power issue? I had no other issues with my HDS hanging, or shutting off. Power did not appear to a issue with the other HDS functions. I Charged the Group 31 battery over night. Tried firing up Livesight this morning - same black screen. Stuck my ear to the transducer to listen for pinging. Nothing. Any ideas? Thanks