can I run 1 wire from battery to under console and put a bus block to hook both unit to, will have inline fuse on each wire to unit,, also what gauge wire from battery
can I run 1 wire from battery to under console and put a bus block to hook both unit to, will have inline fuse on each wire to unit,, also what gauge wire from battery
I meant 1 red and 1 black,, hot and ground
2011 Ranger z521/2023 250ProXS
No,you should not run the positive wire direct from battery to under console area. It must have overcurrent protection device at/near the battery terminal for safety.Originally Posted by 250xb river rat
I used 8ga, but that may be overkill.
Hot wire from the battery through a manual circuit breaker at the battery, then to a Blue Seas fuse block, fuse block to units. I used a manual circuit breaker so I can turn off the power to all attached electronic systems.
Ed R.
2006 ChampioN 198 225 Optimax
+1 on the 8gauge from battery and 10gauge to the units with Necessary overcurrent protection.
I know it sounds like overkill but hummingbirds do not like being under powered.
Reply With Quote
