I’ve got a Tr-22 with Mercury 225 Efi .Have problem with hole shot. It has the original prop which is a trophy 4 blade 25p. On hole shot it hangs the nose up for and extended time then eventually slams the nose down. With the current prop I have to have the whale tail installed to get out of the hole. Without whale tail it blows out. I have adjusted the jack plate every where from 4” below pad up till it loses lift. No big improvements with adjustments. I’ve always felt this was not the correct prop for this set up but have just nursed it along. On pad running WOT I’m only turning 5400 rpm with top speed being 62-67 depending on weather. Hoping some of you Gurus might have an idea of what prop I need to look at. Time to quit nursing it. Thanks