For those that may have picked up a BPS Helix 10 on Black Friday, some may come with the newer generation transducer! If it is 8 1/2 inches long it will require the g3n transducer shield saver!
For those that may have picked up a BPS Helix 10 on Black Friday, some may come with the newer generation transducer! If it is 8 1/2 inches long it will require the g3n transducer shield saver!
Are you sure they didn't sell you a gen 3 ?
They are Gen 2units built with HW2D Compatibility. Promotional item at BPS and Cabela’s. The G3 xdcr gives you HW2D sonar on a Gen 2 model. It does not support extra power of the Gen3SI+ model.
kinda like a hybrid Gen 2 / Gen 3 Mabey a Gen 2 1/2 lol.
Probably won’t support Mega 360.
They are not left over G2 units, they were built for this promotion. I got one that was built 9/20/2019.
Main take away for this is if you are mounting the transducer with a transducer saver/shield, you need the g3n model saver in order to fit because the transducer is longer than the regular g2n transducer.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL