Thank you. Got it figured out.
Thank you. Got it figured out.
Last edited by Bigbassdaddy1190; 12-02-2019 at 08:52 PM. Reason: Solved
Drive closely to a bank, sea wall or drop off.
That sounds easy enough but for some reason I’m having a hard time distinguishing left to right on the image even when I run very close to a hard edge.Originally Posted by grout-scout
Got any bridge pylons?
2B576211
If you run 10’ off the bank with sidescan range @ 80’ and can’t tell.... you got more problems than flippin’ sidescan image.
Buttttt.... if your transducer cable comes out at the back - the flip left/right option flag should be red(enabled). If the transducer cable exits the front of the transducer then the flip left/right should not be selected.
I just grab the net and dip it down in the water on one side of the boat. I have to switch back and forth between my boat and my dads boat when using my units. His boat I have to flip the left/right and mine I don't. I sometimes get confused and with the net or like others said you can drive by a pylon or buoy and tell. If it shows on the wrong side of the screen just flip it.
NPAA #803
Reply With Quote