Go-Jaks

[rakkc]

Checking to see if anyone is using Go-Jaks to move there boats around - I have a 921, tandem axle trailer and checking to see if I can get by with just 2 of the Go-Jaks or do I need to get 4. Thanks

[BigBrownBass]

I kicked this around two years ago and got a trailer valet instead. Love it! I got a 20trx in a 21x19 garage. Will put my new 20 pro xp in there when it arrives this spring.

[Wackyjig]

Depends on what you want to do with them. If you're just using them to grab the tongue and turn it, 2 will work fine. If you need to push is over into a garage corner or something, you'll need 4

[PNWfisher]

Here's a prior thread on Go Jaks and the Harbor Freight model: http://www.bbcboards.net/showthread.php?t=1000275

[AllyFishing]

I've been using them for years!! Couldn't put my boat where its at without them. I have to make a 90 degree angle around a pole in my warehouse. And no extra wiggle room to do it. ONe set of go-jacks under the front axle wheels and its a breeze. If I had a garage and wanted to be more precise on getting it angled or something I'd use 4. I have a new set in the box yet for when the day comes that I retire and move into a home with a normal garage so I can get it tucked away the I want it.

[Phoenix919]

Yes I use 4 and love them

[ONECASTAWAY]

I use 2 Harbor Freight versions to angle my boat in the garage.

[rakkc]

So I picked up 4 Go Jaks locally from a classified ad, ($220 total), 2 required a good cleaning and some lube and are good to go, the other 2 are in need of new casters - any recommendations or just go with the OEM casters. Average price is $30 per caster (needing 8). just looking to save some additional money if possible if anybody has a recommended solution. Thanks

[stratos20xl]

I got 4 from Trailer Valet on Amazon. They were cheaper than Harbor Freight. Very nice quality and moves the boats around the shop with ease.

[AllyFishing]

rakkc. if you have a Harbor Freight or Tractor Supply near you take the caster there and match them up. A caster is a caster...or McMaster Carr ecen

[AllyFishing]

One piece of advice though.......Do not leave the jacs pumped up and stored that way. They may damage the cords on the tires.

[rakkc]

Thanks, I looked at McMaster Carr and did not see any that would fit the requirement. Looked at Home Depot and will give tractor supply a peek tomorrow.

[john721]

I got 4 off them from harbor freight I can’t move it by myself on the jacks so I quit using them

[AllyFishing]

well then that tells me the ones from harbor freight are not good. Are you saying you bought 4 jacks from harbor or 4 castor wheels?

I used 4 under my tandem trailer and I could move it any which way I wanted but mine are the real go-jacs

[AllyFishing]

I have one of these also and it helped a lot.

https://www.tacklewarehouse.com/ABT_...cpage-ATJ.html