Prop question on my 2001 TR186

[Soan]

This is my AZ boat. When I bought it had a 23 pitch aluminum 4 blade prop on it. It runs a decent speed and an excellent hole shot. Since I have a spare 23 pitch 4 blade SS do you think it will work as well.

[Tritonal186]

Yes, it should work well with your set up. It might be even better because SS props don't flex like the aluminum props.

[Bthompson92]

Best one for this setup is a SS 23 pitch tempest plus. The 4 blade SS you have should work too, is it a trophy plus?

[itsahog]

My last boat was a 06 TR186. I absolutely loved that boat. I had a tempest plus 23 pitch - all holes plugged. It had great hole shot and ran 59.7 MPH, with zero chine. If I remember right I was 3” PTP.

[Soan]

Best one for this setup is a SS 23 pitch tempest plus. The 4 blade SS you have should work too, is it a trophy plus?

Yes it is. Since it is a spare prop I have I will try it and see it not better maybe I’ll trade it this winter when I’m in AZ. I would also like to find a 6” plate for this boat.

[Soan]

My last boat was a 06 TR186. I absolutely loved that boat. I had a tempest plus 23 pitch - all holes plugged. It had great hole shot and ran 59.7 MPH, with zero chine. If I remember right I was 3” PTP.

Thanks for your info. My wot was 53 on the gps.

[itsahog]

Thanks for your info. My wot was 53 on the gps.

I should have mentioned I did have a 6 inch jack plate on the boat.