DIY Cull tag holders.....

[fishin couillon]

Saw a few aftermarket setups on Facebook and around here from $25 to $50......had some scrap pieces of 1/2" Starboard leftover and started thinking of how to make a set......the light bulb went off the other night and i'm fixed it up today.....

Cut board to size, drilled holes and routed the edges....all with basic tools....the lip under the deck is was not to thick so i had to use an extra pieced to "step" it up flat under deck....all worked perfect.....

2 pieces:



Put a 2 screws from the bottom to hold it along with 2 nuts/bolts to hold it to the deck.






Then bolted to under side of the deck in livewell......

[bruce']

Nice.


I put a 3/4 inch solid PVC rod across mine.
Screwed them to the inside lip of the lids.