Thread: 2016 250 G2

Results 1 to 3 of 3
  1. #1
    Banned
    Join Date
    Feb 2013
    Location
    south carolina
    Posts
    1,318

    2016 250 G2

    I have this motor on 521. when I am idling the motor seems to shake a lot. I spun prop by hand and it seems not to wobble is this common or is shaft bent etc? Any thoughts

    Thanks

  2. Member Danrude's Avatar
    Join Date
    Apr 2007
    Location
    Marietta, GA
    Posts
    3,529
    #2
    If it only does it in gear then I would take it in to be looked at.
    Dan Burnette - Marietta, GA
    Triton 18TRX - 200 HO G2

  3. Member
    Join Date
    Jul 2019
    Location
    Odessa, TX
    Posts
    54
    #3
    I had a similar issue on my 2018 225 G2 and thought I had a bent shaft even though there was no damage to my prop. Took mine in to the shop and they found what they called the pads on the plugs burnt away. They replaced all plugs to the newest version and it runs better than new. Had 19 hours on the motor when they found the plug issue. I'm sure not a mechanic but thought I would share in case it helps.