Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Nov 2019
    Location
    Belton S.C.
    Posts
    215

    Question Fury Prop on a 21XD

    Anyone have any experience with a Fury prop on a Bullet 21XD with a Mercury Pro XS 250? I see post about Brovo’s, Tempest, Trophy’s and all others but I maybe overlooking some on a Fury. My boat is loaded to fish.

  2. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,427
    #2
    I bought one of the first 27P Fury3 props made.... It was fast, But I hated the prop. Ran 85.4 on my boat. Poor holeshot, and acceleration. Squirrely handling... It's only 14 inch diameter. That is very small for a 3 blade. Bullets like raised motor heights and these Fury props run better deep. I had it sold on the way home from the lake after testing it.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  3. Member
    Join Date
    Nov 2019
    Location
    Belton S.C.
    Posts
    215
    #3
    Thank you very much for your fast response. I have a 97- 21XD with a Mercury 200EFI. I am in the process of purchasing a 250 Pro XS 2 Stroke. I am running a 27 Tempest at this time and have been very pleased with it. I know that I will be experiencing a hole new setup with that engine. As previously stated I go loaded, I call my tackle department Walmart. lol

  4. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,427
    #4
    These props also don’t carry a load as well.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html