comfort troll seems to be the top of the line and there are a few to pick
from. what trays are being used out there? for an ultrex 80.
comfort troll seems to be the top of the line and there are a few to pick
from. what trays are being used out there? for an ultrex 80.
I don’t remember the brand but I got a fiberglass color matched one from Tackle Warehouse. I’ve got a fortrex so I don’t know if the ultrex pedal fits it.
Ultrex foot pedal is 12.5L x9.0 w, hope this helps
Comanche20 (Don)
2008 Ranger Z 20, 225 RUDE
Ultrex 45/36/112
2 Birds
2020 F150 LIMITED Eco Boost
I'm using the R&R Designs one in my boat. It was the cheapest available, is quite neutral looking, well made, big enough for all the pedals out there, and does the trick!
Here it is on Amazon for $73.
2 things: First, I have no idea what pedal the screwholes are made for, but they sure don't fit any pedal I've ever seen. I siliconed the existing holes shut and just drilled new ones.
Second, I had some adventures getting a drain hose to work. I eventually landed on what I felt was a genius idea by using a pipe floor flange. I ended up using galvanized, though if you could find a stainless or aluminum one that'd probably be better just to avoid any concerns of rust (it didn't matter to me as, even if it rusts, it's not going to hurt anything). I bought whatever size matched up to the drain hole in the tray (think it's 1/2") then epoxied it on the underside with 5 minute epoxy just lining up the holes. Then I bought a couple feet of clear tubing off a bulk roll at Fleet Farm (I think it was silicone....get some that you can bend without it creasing) that was the right OD such that I was actually able to "screw it" into the threads on the floor flange due to the snug fit. I siliconed around the edges just for insurance, and ran the other end to the drain tube that runs down the keel of the boat. Works great, and water drains out perfectly since the hose and flange are all under the tray. I did need to add some washers on the screws holding the pedal down between the pedal and tray to allow space for water to drain underneath, but I suspect that's true no matter what tray you get.
2011 Skeeter ZX225
225 Yamaha HPDI Series 2
Minn Kota Ultrex 112 52"
Console: HDS 16 Carbon
Bow: HDS 12 Carbon, Solix 12 G2, Mega 360, Garmin 106 SV, LVS 34
Get ahold of Dawson at fishonfabrications.
woo's tray
My buddy does autobody work.
I gave him dimensions and what I wanted. He just built one for me with some sheet metal from Lowes. Then he painted it.. I think all said and done I paid $40 for everything?
I put the Comfortrol Deluxe in my 2003 Ranger and wish I did it the day I bought it. Well built, nice tool holder and cup holder, fit the ultrex pedal. I purchased mine on tackle warehouse during the 20% off Black Friday sale.
2019 Ford F-150 Platinum (3.5EcoBoost/10spd)
**Listed FOR SALE**2014 Ranger Z119C w/ Evinrude ETEC 225HO Running Croxton’s Razor 4XL 25P
Helix 12 Mega G2N’s with Ultrex
Think like a fish, no matter how weird it gets
You can save a lot of money contracting a fabrication shop or general metal worker.
IMG_20180817_134354.jpg
IMG_20180817_160225.jpg
Tell them what you want
I used the Minn Kota one on my Xpress.
I installed the Comfort Troll for my Ultrex. When I spoke to them they had 2 options on the depth. They have one that is an inch shallower allowing easier access to the foot buttons on the control.
I just installed an EZ Troll, Ultrex fits in it.
thanks all
R&R
Have a Blessed Day,
Mike