Results 1 to 5 of 5
  1. #1
    Member wareagle24's Avatar
    Join Date
    Aug 2009
    Location
    Florence, Al.
    Posts
    16,603

    Has anyone ever had their outboard dynoed?

    I've been at the old Jaco's Marine location when they had one of their Merc Racing beast in the tank just ringing the s*#t out of it. I've wondered if anyone has ever had their motor dynoed? More hp than expected or less?

  2. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,432
    #2
    HT does it with a lot of their motors... I could have had mine done when they re built it.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  3. Iowa/Wisconsin/Hunting & Gun Lodge/Stroker Moderator Wags's Avatar
    Join Date
    Jun 2004
    Location
    Camanche Iowa
    Posts
    13,553
    #3
    I have had mine done a few times from Hydro Tec, I drove out to them when they asked if they could use my motor for data on the ECU limier raise project they were doing. I was able to capture more HP the motor had from installing all of the HT HP upgrades they had to offer, right a 400 HP on the 6800 limiter.
    LeaLea

  4. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,432
    #4
    I should have had mine done... It's weak. I have 90% of all the goodies too. Runs great though.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  5. Iowa/Wisconsin/Hunting & Gun Lodge/Stroker Moderator Wags's Avatar
    Join Date
    Jun 2004
    Location
    Camanche Iowa
    Posts
    13,553
    #5
    Mike if I remember correctly I captured an additional 30 HP from the limiter upgrade and was still not dropping off at 400 HP 6800.
    LeaLea