Serial Number 1B822149.
For the life of me, I having trouble find the torque value, I have looked in the FAQ and search for the info.
thanks in advance.
Serial Number 1B822149.
For the life of me, I having trouble find the torque value, I have looked in the FAQ and search for the info.
thanks in advance.
Retired 2022...Ranger 2011 Z520, OptiMax 250 1B822149, 8" Bob's Jack-plate, Helix 12si / Helix12di, Duel 12' Talon's, Ultrex 112 i-Pilot Link, Mega 360 and Bravo XS 25.
At ~400 hours had injectors clean and calibrated by INTEGRITY Injection (by European Marine)
Subject says "fill/drain plug". Look BEHIND the prop on the bottom inside the gear case. IE you have to remove the prop. That would be my guess not knowing what lower unit you are running. Can be a surprise if you are used to it being on the bottom quadrant of the gear case near the front...
2008 Bass Cat Pantera Classic
2014 Mercury Pro XS 200
Originally Posted by OldTimer57
I could be wrong but you may want to reread his question. He’s asking the torque value for the plug, not where its located.
2018 Phoenix 819 / 2018 Mercury 200 Pro XS
hand tight will suffice.
"Better to remain silent and be thought a fool than to speak out and remove all doubt."
I'm sure there's a # number somewhere but I've watched certified mechanics change fluids and all they do is thread the screw and tighten it down with a regular screwdriver... Dan
Specs are in the Service Manual, if I get a chance tonight I'll post them.
Just say n one persons hand tight may differ from yours. If you have Popeye forearms like mine will be different than Olive Oyl's.
Steve McQueen "Le Mans"
Own the Champ!Life Long Petty Fan!
2003 ChampioN 2006 250 Merc. XB, Prop By Mark C.
2002 Ranger Okeechobee Special EvinRude Ficht 90 / 9.9 4-Stroke GLAD to have a Get me to the Dock motor maybe!
Same here, please post page number from the O/M.
Retired 2022...Ranger 2011 Z520, OptiMax 250 1B822149, 8" Bob's Jack-plate, Helix 12si / Helix12di, Duel 12' Talon's, Ultrex 112 i-Pilot Link, Mega 360 and Bravo XS 25.
At ~400 hours had injectors clean and calibrated by INTEGRITY Injection (by European Marine)
Spoke with Mercury customer service this morning, answer is 100 inch pounds which includes the vent screw.
I have the Mercury service manual 90-8M8000017, this book does not have the gear case information in it, that I can see.
Retired 2022...Ranger 2011 Z520, OptiMax 250 1B822149, 8" Bob's Jack-plate, Helix 12si / Helix12di, Duel 12' Talon's, Ultrex 112 i-Pilot Link, Mega 360 and Bravo XS 25.
At ~400 hours had injectors clean and calibrated by INTEGRITY Injection (by European Marine)
You're correct. That is because 8M8000017 (250XS Racing) Manual does not cover gearcases.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
With all due respect Don, this is the manual that you suggested for me we spoke sometime back, I would've thought it had all the information for my engine/ lower unit, I believe my engine is not a 250 SX racing engine.You're correct. That is because 8M8000017 (250XS Racing) Manual does not cover gearcases.
Retired 2022...Ranger 2011 Z520, OptiMax 250 1B822149, 8" Bob's Jack-plate, Helix 12si / Helix12di, Duel 12' Talon's, Ultrex 112 i-Pilot Link, Mega 360 and Bravo XS 25.
At ~400 hours had injectors clean and calibrated by INTEGRITY Injection (by European Marine)
Rangerdic: I did go back and check, and your engine serial number actually specifies this manual (in the Parts Catalog). That being said, there is a later manual (higher serial number group) that would be a better choice for you.
Drop me an email, or give me a call and I will make arrangements to get you swapped out.
Sorry... took me a bit to put "Dic Crider" (from your profile) together with your name.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Below is the torque specification on a Gen2 Torquemaster.
Fill Screw is 17 lb/ft
Vent Screw is 60 lb/in.
This should be a Verado-Style gearcase on this engine, according to the Model Number.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Verado-Style gear case, Don thanks for your knowledge and outstanding support, I will call you tomorrow.
Retired 2022...Ranger 2011 Z520, OptiMax 250 1B822149, 8" Bob's Jack-plate, Helix 12si / Helix12di, Duel 12' Talon's, Ultrex 112 i-Pilot Link, Mega 360 and Bravo XS 25.
At ~400 hours had injectors clean and calibrated by INTEGRITY Injection (by European Marine)
Reply With Quote
