I have a 2008 mercury optimax 90horse it came with an analog trim sender can anyone tell me what I need to convert it to a digital sender for a smart craft gauge
Thanks
I have a 2008 mercury optimax 90horse it came with an analog trim sender can anyone tell me what I need to convert it to a digital sender for a smart craft gauge
Thanks
Probably just need to replace the analog sender with a digital one. If you post your engine serial number one of the pros here can confirm.
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
Thanks ill post it
the serial #1b519899 tried a digital sender but will not calibrate
http://www.bbcboards.net/showthread.php?t=272775
Older post but part number still the same (you can check here with your serial)
Optimax 90 - 2B019339 (2014), Quicksilver 580 Pilothouse (2006)
IMPORTANT: There is an adapter harness that comes in the 891777A01 Digital Trim Sender. IT MUST BE INSTALLED BETWEEN THE ENGINE AND THE TRIM SENDER.
If you do not install this adapter, THE SENSOR WILL PLUG IN, BUT WILL NOT CALIBRATE.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Thank you very much that’s what I’ve been searching for