I am looking at a 2000 19SS that is in rough shape. All the black panels are in poor condition from the sun. This includes the bow, dash, drivers side and passenger side panels. The black coating is pretty much gone and the foam beneath is pretty deteriorated.
My question is, how close would panels from other models fit?
Thank you!
2012 Bass Cat Cougar FTD
2012 Mercury ProXS 250 w/ Fury 3 26
To the best of my recollection,the consoles in the SS series were the same,even the bow panels too if they were the same year model. There was some minor changes from year to year. To be honest,I ran a 2000 21 SS and hated that boat. That concave pad was a very poor design and was poorly built too. The little outside wedges on the pad were not cast into the hull and would eventually come off. Look at the pad very close before you buy.But,if you can find an intact plastic piece,it can be vinyl wrapped or sprayed with plastic-dip and look nice.
19-20ss totally different than 21ss hull
2022 z519 cup 225 merc 4s ser # 3B210484. 2--hds12 live units. 2 poles, atlas plate, ghost, hamby's, active target, merc digital gauges
2002 basscat pantera 3 (dad bought new) sold 8-2-22
2000 stratos 20 ss (bought new) 200 hp Rude ficht great boat/motor sold 11-21
pulled by a 2500HD Denali
proud dad of an ARMY Captain
MAGA
ASE/GM Master tech before tools
Reply With Quote