I am going to build a few inline spinners like Blue Fox Size 3 (1/4 0z)
What size Trebles go on them?? size 4 or 6? Is feathered trebles a plus or dont matter??
I am going to build a few inline spinners like Blue Fox Size 3 (1/4 0z)
What size Trebles go on them?? size 4 or 6? Is feathered trebles a plus or dont matter??
#6. Build one then check it in water. If its not the proper spacing (clevis &blade to body) the blade will just pull in tight and do nothing. Once you know how many beads it takes then let it rip
When I make 1/4oz in-lines I use the #4. Now I've never used the bell body that a blue fox uses but I have used a lot of lead and brass bodies. Spacing isn't an issue, blade and clevis size is but on a 1/4oz bait you are probably going to use a #3 French blade so you shouldn't have any issues. If you have any problems let me know and I should be able to help, I've done a lot of in-lines from 1/16oz to 1/2oz using a lot of different blade types.
Thanks Smalljaw.... Appreciate it. I ordered #4 and # 6 trebles. I have some of both but I wanted a few feathered trebles too of each size. YES, #3 french blades. Making 10 1/4 and 10 3/8th.
Where are you getting all of the parts to make them? I have a friend who loves these spinners but hates the $5 price tag.
pink spinner yellow dots 002.jpg Here ya go. Just food for thought.
I’ve searched the links above, but can’t find where to buy the bell and the piece that goes inside the bell? Any help on that?
thanks! Don't know why I couldn't find them!