Sho trim problem

[charlesg]

Have a 250 sho the trim leaks down but no oil is coming from any of the o rings anyone experienced this before ?

[yam911]

It is known to happen. Probably due to an internal seal or check valve/ball problem.

Have you confirmed that the trim/tile release valve screw is fully tightened?

[charlesg]

Yes all that is tight and no fluid coming out anywhere

[1GThompson]

Have a 250 sho the trim leaks down but no oil is coming from any of the o rings anyone experienced this before ?

Same thing was happening to my 2017 200 SHO. My manual lowering screw wasn’t tight

[snookonfly]

Same thing was happening to my 2017 200 SHO. My manual lowering screw wasn’t tight

Agree! The leaking down was happening to me while running. Id check the manual screw before doing anything else. Tighten it down and then go run it again. If it doesn’t leak down again, problem solved! Had the same deal and was so relieved it was just a screw.