When re-carpeting bunks is the new carpet simply wrapped tight with stainless staples used on the bottom of the bunk? Or is there need for adhesive as well such is used when replacing carpet on the deck of the boat. Thanks
When re-carpeting bunks is the new carpet simply wrapped tight with stainless staples used on the bottom of the bunk? Or is there need for adhesive as well such is used when replacing carpet on the deck of the boat. Thanks
Randall Heinrich
Alpharetta, GA
2002 Ranger 195VS
200 Yamaha VMax EFI
I've always used staples. I don't recall seeing any with glue on the bunk boards. I have seen some side boards that had carpet glued on.
I use 3M spray contact cement. It helps to hold the carpet in place while you staple.
2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,
Ditch the carpet and get you some Gatorbacks....
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
Thanks for all your comments
Randall Heinrich
Alpharetta, GA
2002 Ranger 195VS
200 Yamaha VMax EFI
BULLET 20 XRD/250 Merc Sport XS
www.ncboatguy.com
Gatorbacks
Kevin I don't think your going to find a synthetic board that will hold the weight. I use KDAT lumber and paint it to match the boat.