Results 1 to 13 of 13
  1. #1
    Member
    Join Date
    Nov 2015
    Location
    Struthers, ohio 44471
    Posts
    274

    Vault or vortex?

    Looking to change out my oil bath hubs on my 04 ranger trail, vault or vortex hubs guys what is the pros and cons of both or just change the hubs to grease that r on my trailer now?

  2. Member ifishinxs's Avatar
    Join Date
    Jul 2015
    Location
    Southern Utah
    Posts
    6,454
    #2
    Been running vault for over 10 yrs and they are still going. When the seals finally start to leak I’m staying with vault.
    2024 Phoenix 818, Mercury 175 (3B414035) Trick Steps, 3 Garmin 106 SV,s, LVS 34. BoatEFX dual bow mount. Ionic 12V 125AH, 2 12V 100 ah LiTime’s for the TM. Minn Kota 345 PCL charger,

  3. Member Jeff Hahn's Avatar
    Join Date
    Oct 2011
    Location
    Alliance, Ohio
    Posts
    31,441
    #3
    Why not just clean the oil out of your old hubs and pack them with grease? Easy peasy!
    "The man of system is apt to be very wise in his own conceit; and is often so enamored with the supposed beauty of his own ideal plan of government that he cannot suffer the smallest deviation from any part of it…He seems to imagine that he can arrange the different members of a great society with as much ease as the hand arranges the different pieces upon a chessboard.” Adam Smith, The Theory of Moral Sentiments

  4. Member
    Join Date
    Aug 2015
    Location
    New Bedford,MA
    Posts
    2,710
    #4
    Torsion or spring suspension?

    Just not sure if last of UFP, or beginning of TDE system.
    Mike

    2019 Ranger 520L w/ 250HO ETEC G2
    2011 Tracker 175TXW w/ 75HO ETEC

  5. Member
    Join Date
    Nov 2015
    Location
    Struthers, ohio 44471
    Posts
    274
    #5
    It’s torsion, I was going to just clean and grease the old ones but thought I would just use them for spares to keep them it back of my truck for a just in case.

  6. Member
    Join Date
    Dec 2018
    Location
    Kelseyville Ca
    Posts
    5,565
    #6
    Ive had boats for over 40 years and the vault system I have now seems to be the least maintenance
    I had nothing but trouble with oil filled hubs, always had some water in them

  7. Member
    Join Date
    Jan 2012
    Location
    Nixa, MO
    Posts
    3,231
    #7
    Vault hubs here, Five years no problems..

  8. Member
    Join Date
    Aug 2015
    Location
    New Bedford,MA
    Posts
    2,710
    #8
    Good possibility that they sre TDE spindles and hubs.
    If so, Vortex hubs will slip on and work just fine.
    Mike

    2019 Ranger 520L w/ 250HO ETEC G2
    2011 Tracker 175TXW w/ 75HO ETEC

  9. tracer1 tracer1's Avatar
    Join Date
    Jun 2013
    Location
    Aiken, SC
    Posts
    2,393
    #9
    Vault....11 years & still going

  10. Member CHECrappie's Avatar
    Join Date
    Feb 2014
    Location
    Oklahoma
    Posts
    1,375
    #10
    I have vault hubs. I bought my Triton at boat show in 2013 with the added 10 year warranty. So far they’ve had to replace 3 seals. But hasn’t cost me a dime outside of trailering to the dealer. I put 5-6,000 miles per year on my trailer.
    2021 Phoenix 21PHX

  11. Member BILL LO's Avatar
    Join Date
    May 2009
    Location
    SC / MA
    Posts
    4,648
    #11
    Vault 10 years

    2009 ELITE 210

  12. Member
    Join Date
    Jan 2013
    Location
    Hamilton, Ontario
    Posts
    463
    #12
    Original vaults from 2003, I’ve topped up the grease with high heat waterproof grease, just pumped it in with the old when I need to top it up. No leaking, just a little bit of sweat around the rear seal. Check them 2 or 3 times a season, everything still good

  13. Member judecca's Avatar
    Join Date
    Jan 2014
    Location
    Lake Camelot, IL
    Posts
    157
    #13
    Vault for 7 years... zero issues or maintenance.

    -Ryan W.
    Phoenix 920 Pro XP
    Mercury 250R
    Minn Kota Ultrex 112# iPilot Link
    Garmin GPSMap 1243xsv + 1243xsv @ Helm
    Garmin GPSMap 7616xsv + 1243xsv / Dual Livescope+ @ Bow