Results 1 to 5 of 5
  1. #1

    95 180 SuperPro with 175 XRI Setup Help

    I have had this boat for a while but only had a 150 on it and was running a 25p laser2

    I switched to a rebuilt 175xri, cc reeds, short tuner.

    Just wrapped up break in on the motor and when opening it up the back end is starting to feel a little loose. The motor obviously pushes that 25p laser2 pretty easily. Curious if there are any prop suggestions for this boat with a 175?

    trophy, tempest, fury?
    1995 ProCraft SuperPro 180 / Mercury 150 XRI

  2. Member
    Join Date
    Apr 2012
    Location
    Atlanta
    Posts
    1,334
    #2
    Mine came stock with a 27 lasar2 with my 150efi. 26 trophy for all around performance.

  3. #3
    The trophy is a small hub right? I have a 25p in the garage already I might try that this week.

    Is a fury too much for this setup? Does the lift on this boat make that prop a bad selection?
    1995 ProCraft SuperPro 180 / Mercury 150 XRI

  4. Member PROCRAFT192's Avatar
    Join Date
    Mar 2009
    Location
    Corinth, MS.
    Posts
    440
    #4
    I have an 04 192 Super Pro with 200 Pro xs. I run a 25 Tempest plus it really brings the bow up pm my boat better than the 25 Trophy I ran for awhile. I also have a 24 Fury 3 blade and I like the Tempest better than the fury.

  5. Member
    Join Date
    Apr 2012
    Location
    Atlanta
    Posts
    1,334
    #5
    Not sure about a fury prop on that set up. A trophy or 27 laserII which will be hard to find. Procraft192 this boat and your boat are completely different boats.