Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Sep 2019
    Location
    Stafford VA
    Posts
    5

    Ignition key spins freely.

    I have a 13' tracker 165. Whenever I start the engine, the key will spin freely in a circle. Anyone know of a quick fix?

  2. Member
    Join Date
    Feb 2018
    Location
    Cataula, GA
    Posts
    1,622
    #2
    Is it just the key or the entire switch? The nut on mine will come loose sometimes and the entire switch will spin.

  3. 80.3 mph and squeezing bruce''s Avatar
    Join Date
    Feb 2016
    Location
    Southlake Texas
    Posts
    435
    #3
    Quote Originally Posted by mastergun View Post
    Is it just the key or the entire switch? The nut on mine will come loose sometimes and the entire switch will spin.

    ^^^^^this mine comes loose every once and a while.
    Fishing Texas lakes one at a time
    2000 Baltex hull 202 Elite Champion
    2016 250 pro
    8 inch Hydraulic Jack Plate
    tempest 27 work by Steve
    Hook sets are fishing reality.

  4. Member
    Join Date
    Apr 2015
    Location
    East Tennessee
    Posts
    531
    #4
    FWIW, I have had to replace the switch in my 2012 TXW 175 three times for locking up

  5. Member
    Join Date
    Dec 2012
    Location
    South FL
    Posts
    620
    #5
    When I had my ProTeam 165, I had that happen once in the 20 years I owned it. I replaced the whole switch.
    2019 Vexus 1880 w/ Mercury Pro-XS 115 4-stroke, MK 80lb Fortex, Twin Helix 7 Birds, Pro II PowerPole. AEguideservice.com

  6. Member Bill Reynolds's Avatar
    Join Date
    Aug 2013
    Location
    The Diamond State
    Posts
    3,868
    #6
    I had a problem with my entire switch turning, and I could not get it to tighten up. Finally discovered the plastic nut was cracked. Replaced it and problem solved.

    I try to drive as if my 16 year old Grandson is following me
    Speak as if he is listening and act as if he is watching