Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jan 2008
    Location
    Parry Sound, Georgian Bay
    Posts
    955

    96 SuperPro200 with Merc 200...

    We just picked this up for my Uncle. Nice boat. Jackplate looks like 8", manual adjust. Motor looks like it is 3" below the pad. I am thinking that is at least an inch too low? 96 Merc200 efi.
    25p Tempest plus.

    My uncle had it out yesterday, ran an easy 60mph but says steering is stiff, could that be the trim tab needs to be turned, it is straight right now?

    Would be nice to find some original seats for the boat. It has been outfitted with 2 new Cabelas folding seats.

    Seams the hatches on the floor are fiberglass.

    Anyways, answers to these would be nice! Thank you!
    04 Triton TR21X, 23 SHO NIZPRO'd!!!
    27p Croxton Razor 4

    old rigs
    95 BassCat Pantera II, 200 XRi Merc

    97 Skeeter ZX185c
    97 ProV150--KOTTMANIZED! 27M

  2. Member
    Join Date
    Apr 2012
    Location
    Atlanta
    Posts
    1,334
    #2
    You got any pictures of that boat. What color is it, i may be getting rid of my stock gray seats and going to allison bucket seats. It should have came stock with a 12"plate and that should be a 75mph boat with the 200efi. I'm running a 225pm on mine right now. But be careful, it does require a lot of driver attention until you get use to it.

  3. Member
    Join Date
    Jan 2008
    Location
    Parry Sound, Georgian Bay
    Posts
    955
    #3
    Here's a pic!
    Attached Images Attached Images
    04 Triton TR21X, 23 SHO NIZPRO'd!!!
    27p Croxton Razor 4

    old rigs
    95 BassCat Pantera II, 200 XRi Merc

    97 Skeeter ZX185c
    97 ProV150--KOTTMANIZED! 27M