Since I had to replace my transducer I decided to change the route of my network and tranducer cable.
Obviously have more work to do and a lot of cleaning up....lol
Feedback always welcome...
IMG_20200417_231244.jpg
IMG_20200417_231213.jpg
IMG_20200417_231155.jpg
IMG_20200417_231114.jpg
IMG_20200417_230631.jpg
Always "Huntin" the IA Bass!
Boat: Nitro Z7
Primary Propulsion Unit: 200 Optimax ProXS
Vertical Depth Propulsion Adjustment: 8" Bobs Action Jack
Underwater Surveillance: Solix10 G2 Console & Solix10 G1 Bow
Anchoring: Powerpole, Ultrex Spot Lock
Dynamic Positioning System: Ultrex i-pilot Link
Looks goodI need to reroute mine after adding a 360. Probably wait until I replace the 998 and have to change Xducer.
I like it where did you get those cable ties at.
Hopefully you'll get a chance to test it out on the water soon.
Wes
Helix 10 MSI+,MDI+,Ultrex IPilot
2023 Phoenix 818
Never assume there's a tomorrow
I use that type also. I think the last pack was from an auto parts store. I use them also for hook keepers on fishing rods that don't have them.Originally Posted by fishon396
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
I drilled and tapped the holes in the Ultrex and used a round hex head Stainless steel screw 10-32 x 1/2" The screw ens up flush on the back side. put a drop of thread sealant on each screw (blue type)
Got everything at Menards...
Always "Huntin" the IA Bass!
Boat: Nitro Z7
Primary Propulsion Unit: 200 Optimax ProXS
Vertical Depth Propulsion Adjustment: 8" Bobs Action Jack
Underwater Surveillance: Solix10 G2 Console & Solix10 G1 Bow
Anchoring: Powerpole, Ultrex Spot Lock
Dynamic Positioning System: Ultrex i-pilot Link
This afternoon if I get it together or tomorrow morning for sure.Hopefully you'll get a chance to test it out on the water soon.
Biggest thing on this set up is making sure you have cable slack in the right places so everything can move freely without tension anywhere.
Always "Huntin" the IA Bass!
Boat: Nitro Z7
Primary Propulsion Unit: 200 Optimax ProXS
Vertical Depth Propulsion Adjustment: 8" Bobs Action Jack
Underwater Surveillance: Solix10 G2 Console & Solix10 G1 Bow
Anchoring: Powerpole, Ultrex Spot Lock
Dynamic Positioning System: Ultrex i-pilot Link
Well...that is a great idea Wayne, Thanks! Now I know what to do with the extras from my pack.
Always "Huntin" the IA Bass!
Boat: Nitro Z7
Primary Propulsion Unit: 200 Optimax ProXS
Vertical Depth Propulsion Adjustment: 8" Bobs Action Jack
Underwater Surveillance: Solix10 G2 Console & Solix10 G1 Bow
Anchoring: Powerpole, Ultrex Spot Lock
Dynamic Positioning System: Ultrex i-pilot Link
So had the boat out yesterday for a full day on the water and the re-route of the cables seemed to fix all interference issues. I was able to set the interference filter setting to 1 and still see no interference when TM is enguaged. Images are razor sharp. I took a screenshot and will post after I get it off the unit.
Very happy with this change, should have done it on the original installation of the TM.
Always "Huntin" the IA Bass!
Boat: Nitro Z7
Primary Propulsion Unit: 200 Optimax ProXS
Vertical Depth Propulsion Adjustment: 8" Bobs Action Jack
Underwater Surveillance: Solix10 G2 Console & Solix10 G1 Bow
Anchoring: Powerpole, Ultrex Spot Lock
Dynamic Positioning System: Ultrex i-pilot Link
Think I am going to do that as well. Nice and clean.
Looks good nice and neat.
Reply With Quote