I recently bought a used stradic ci4+ and the drag is not consistent, sometimes the drag will pull out easier and sometimes it takes more effort to pull the drag. I don't know much about spinning reels but I did put a small amount of grease on the drag felt and it doesn't seem to help much. I'm not even sure if you're supposed to put grease on them or not. Do you guys know what it can be?
2004 Stratos 295 Pro XL
2004 Mercury 3.0 L EFI 200 HP SN: 0T908560
Standard/Servicemaster Lower 859399T13
What kind of line is on it? If it has braid, but no backing the braid could be slipping on the spool.
2020 Triton 206 Allure
Mercury 250 Pro XS 4S Serial # 2B642047
Bravo XS 22p @ 4.5" PTP
Minn-Kota Terrova 112 w/ IPilot
Lowrance Ti2 12" Console
Lowrance Ti2 9" Bow
Lowrance Point 1
Standard Horizon GX2350S
Shakespeare QC-8 Antenna
it's braid but it has backing
Originally Posted by flyinghappy
2004 Stratos 295 Pro XL
2004 Mercury 3.0 L EFI 200 HP SN: 0T908560
Standard/Servicemaster Lower 859399T13
drags need serviced properly
Dan
" Serious Service for the Serious Angler"
Reply With Quote