Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    May 2019
    Location
    Decatur, AL
    Posts
    13

    200 SHO Prop Recommendation

    Hi, I have a 2012 200 SHO and am wandering where to start with a different prop, pitch, diameter ect. Any help would be appreciated. The boat is a 2001 tr19.
    Thank you

  2. Member
    Join Date
    Nov 2008
    Location
    Roswell
    Posts
    10,586
    #2
    I ran a Fury 25 prop on my last SHO (250). My new SHO came with the Yamaha SHO prop on it but I’m still using a Fury as my spare. You just need the flo torq adapter. All holes in my Fury are plugged.

  3. Member
    Join Date
    Aug 2018
    Location
    1000 Islands, Ontario
    Posts
    958
    #3
    I have a 200 SHO on a ZX200 Skeeter. My prop is a 24" FXP 3-blade, 14 3/4"dia. (by Precision Propellers, a Yamaha company). This prop runs 5900rpm, so I think in my case a 23" would be a little better to get over 6000rpm. It's a great prop, and I believe it's very similar to the Yamaha SHO prop, but about $200 less.

  4. aka Strokedyamaha StrokerSmoker's Avatar
    Join Date
    Oct 2014
    Location
    Kansas
    Posts
    2,045
    #4
    My buddy kieth just ran his hydro-tec flashed 200 sho 196 triton 94.XX gps ....not sure on year but have heard that the 2000s tritons where a bit lighter...Ill see if he can swing by but he will need current set up jack plate current prop speed and rpms helpful too

    Hi performance parts or a Yamaha power head visit
    Hydro-Tec's web site @ http://www.yamaha-rebuild.com/
    Paul Hottman Hydro-Tec's Pro staff since 1998

  5. Member
    Join Date
    May 2010
    Location
    Prairieville, Louisiana
    Posts
    819
    #5
    Is the motor stock? Do you have a jackplate, if so, how much setback? Have you run it yet?
    Keith Broussard Caney Lake, Louisiana
    2000 TR21 2000 Mercury 250 Pro XB OG980775 14" hydro plate