250 Mercury 4 Stroke

[Gavol64]

I got lucky and found the Mercury 250 4 stroke motor up at Dixie Marine in Ohio. Had it shipped to Georgia And installed it on my 2016 Triton 21 TRX Elite. I was able to get one hour of Break in out of the way today on Lake Lanier. The motor has a 24 fury 3 . Is that the correct prop . What prop are the rest of you guys running? I will post some numbers after break in .

[CaymasMan250]

Try a tempest plus, I had the same boat and now running the bigger boat and both of them like the Tempest plus.

[Gavol64]

24 or 25

[Savage]

Depends on your current WOT RPM's with the 24P Fury.

[Gavol64]

I have not got there yet
Got couple more hours to go

[Landar]

24 Fury is fastest on my 21 TrX. 25 Tempest carries the bow better but not quite as fast.

[Gavol64]

Finally got the motor broke in and to stretch her out here on Lanier.
2016 21trx Elite
10” hydraulic Jack plate .
Best numbers 75 mph 5990 rpm . Number 8 setting on the jack plate . Light chop 69 degrees
24 fury 3
Awesome hole shot
40 gallons fuel
Live wells empty
I weight 260
Full load tackle
Talon brackets no talons .

[21xTriton05]

Finally got the motor broke in and to stretch her out here on Lanier.
2016 21trx Elite
10” hydraulic Jack plate .
Best numbers 75 mph 5990 rpm . Number 8 setting on the jack plate . Light chop 69 degrees
24 fury 3
Awesome hole shot
40 gallons fuel
Live wells empty
I weight 260
Full load tackle
Talon brackets no talons .

Sounds about right. I wouldn't change props because you're topped out now

[Gavol64]

Awesome motor .
Thanks for the input !!!