Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jul 2018
    Location
    Lower Burrell Pa
    Posts
    1,643

    Spotlightscan and LSS-1 together?

    HDS Gen3 with LSS-1 and box. Can i add a spotlightscan for 2d?

  2. Member
    Join Date
    Jul 2013
    Location
    Galena, Kansas
    Posts
    824
    #2
    Quote Originally Posted by Chief Brody View Post
    HDS Gen3 with LSS-1 and box. Can i add a spotlightscan for 2d?
    Yes, the spotlight scan transducer will use both sonar and structure ports on back of gen3.

    You will also need SLS-100 sensor and NMEA2k backbone if you want to use Spotlight. Also can only use on specific cable controlled trolling motors.

    If you do not use Spotlight, the transducer works great for Down imaging and 2Dchirp.

    Not sure where your LSS-1 is located, if on the trolling motor, there is not enough room for the spotlight transducer and LSS-1. You would need a regular 2D transducer with your LSS-1, a couple companies make mounts.

    If the LSS-1 is on your trolling motor, I would more apt to go with the Totalscan transducer and get rid of the LSS-1 and box, if 2D is what your wanting to add.

  3. Member
    Join Date
    Jul 2018
    Location
    Lower Burrell Pa
    Posts
    1,643
    #3
    Nice. Thanks, m

    I keep most of my transducers on portable sticks, so the spotlight would probably go on another.

    It would be for just 2d. Its the only 2d i have to compliment the LSS-1