Tiptonite you have a pm.
Tiptonite you have a pm.
Another vote for HT. Those guys know their stuff on Yamaha motors.
Go Gators!
Here is another good option. https://www.outboardexchange.com/200_yamaha/index.html
Ok let me throw my advice out there. As a matter of fact call me. I had the same exact thing to my 1998 yami 200hp. Carb motor. I dealt with hydro tech the whole time. Excellent company. Give me a shout and I’ll tell you what their advice was to me. Best thing i could have done. My number is 502-810-7759. Tom.
Thanks Tom! I finally got around to calling HT today and spoke with Ben. He said Mark (or Matt maybe?) was already out for the day and he'd be the one I want to talk to about my motor. I'm PST so it's been difficult trying to reach them after work. I finally did it while I was at work today and still ended up being a little late.
Anyways, just speaking to Ben, I liked what I was hearing. It sounds like I may have a good chance of getting it rebuilt and at a reasonable price. He also said they could get another 60 or so HP out of it if I wanted. Thanks to milligjg for giving me the idea to ask about that!
Anyways, I'm going to start pulling it apart this weekend to see if there's any major internal damage as that would probably drive the cost to high for me to justify a rebuild. If that does become the case, then I think I'll be following 1Holeshot's advice and selling it for what I can get to buy something newer.
Let us know how it turns out.
2006 Triton TR196 w/ 200 Optimax \ 2021 AlumaRyder 1860 w/ 200 Rotax
2001 ChampioN 206 Yamaha 225
I’d rebuild
That's a good point I hadn't thought of. My intention was to see how much internal damage was done so I could get a better idea of the cost involved to rebuild. Having said that, I think I have enough information to share with the folks at HT to get an idea of the cost by just pulling the head off.
I'm certain the crank journal is shot. The rod bearings are gone, and I can see the side of the rod is burnt. I don't know if welding them up is done in marine applications like it is in automotive, and even then not all types of cranks can be welded.
The rod also dug about an 1/8" groove in the lower portions of the cylinder block, and the cylinder itself will definitely need a sleeve.
Here's some pictures of the damage.
Pro-V (17).jpg
Pro-V (13).jpg
Pro-V (29).jpg
Pro-V (37).jpg
Pro-V (51).jpg
Pro-V (52).jpg
Looked at the (very good) pictures. It sucks to be you. None of that will buff out.
I just blew my 2002 Evinrude 225 HO. Advice i got from my mechanic/marina:
Try to stay with the same brand if you are happy with it because all the instruments and rigging connection accessories into your boat can cost an additional 3K or so and may not fit in your older boat console. So might be best you stick with a Yamaha.
You may want to stick with the generation of Yamaha that is not current nextgen level of new ... because they are electronic and the instraments and connections are completely different for rigging in your boat.
Try to get a used engine that has a transferrable warranty on it. I don't know if Yamaha does that but Evinrude does
Good luck!
From the looks of those pics....I'd be worried about the block and crank.....both are $$$ May be better to get a used engine or powerhead....
That's pretty much been my assessment too. Once I get the time to talk to the right folks at HT and let them know the damage, I should be able to get a good idea of the cost. Ben, the guy I spoke with there last week made it sound like they had those parts available so we'll see. So far I've been unable to find any place with a powerhead in stock.
Last edited by Tiptonite; 10-14-2019 at 08:34 PM.