Hello to all, is there a engine harnas for my F40 ELPT EFI 2019 sr nr 1C529467 to ad a digital trim and water pressure to read out on smartcraft/nmea200 via the gate way?
Hello to all, is there a engine harnas for my F40 ELPT EFI 2019 sr nr 1C529467 to ad a digital trim and water pressure to read out on smartcraft/nmea200 via the gate way?
Alcohol don't solve your problem ,but niether do milk
Please see you prior post regarding digital trim and re-read reply #9 from Don - trim sender problem
The domestic North America 40hp EFI is capable of displaying the following engine parameters depending on Smartcraft device used:
RPM
Engine Guardian
Hours
Fuel flow/level/range
Troll Control
Battery voltage
Engine diagnostics
Engine temperature
Engine alarm values
Favorites screen on/off
Engine trim is NOT an available engine parameter for domestic North American engines, whether it is, or is not, an available engine parameter for European engines would be a question to ask of your local dealer or Mercury Marine Europe. Hope that helps.
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
Oke thanks , in the Netherlands the knowlege of the merury possibillities is not so great thats why i posted my questions here ,i contacted several mercury dealers here and they dind't now.
Alcohol don't solve your problem ,but niether do milk