I have a 2005 Triton Tr-20X with a 2014 225 Yamaha SHO. I am having an issue with holeshot I have a 10" Atlas hydraulic and two 10fttalons. I used to have whip cracking hole shot. Now I have to run my plate all the way up and it barely comes out of the hole with 2 people and full livewells. Even worse when I am full of fuel. The engine seems to stall out at 3000-3100 RPM then it will finally rev up and come out of the hole. Sometimes I have to try 2-3 times to get the boat up on plane. If I run my jackplate all the way down or anything under 1/2 up the boat will not plane out at all. I just had the boat at the dealer and they changed the low pressure fuel pump under warranty and it's still doing the same thing. Top end is fine 72+. I am going to call them again Monday but I am wondering if my fuel lines are collapsing on holeshot? They are the original 2005 lines.