Pricing and availability coming as soon as I can find out from the folks at Cornfield Crappie Gear ...
Rickie
Pricing and availability coming as soon as I can find out from the folks at Cornfield Crappie Gear ...
Rickie
That looks pretty slick. Might hold out for one with a "spot lock" feature though. A automatic "scan" option would be nice too
I saw it at the expo....995.00
They obviously infringed upon my idea!
I have mine working off a remote currently. Have plans to add wired foot controls. Had this put together for about 7 months. Used cornfields mount on an old power drive trolling motor that had a good steering motor but that was about it. Added a reversing relay, remote and voltage regulator to control the motor speed and I think I have about $35 into it beyond the parts I already had laying around.
Usually running from spot to spot I just pull it up as seen in one of the pictures. When towing the boat I store it in the down/stowed position. Works great haven’t had any problems. Have added a directional arrow at the top.
Last edited by thomasfouraker; 10-07-2019 at 08:47 PM. Reason: Added info
2001 Mercury Optimax 225
0T344965
2000 Mercury ELPTO 125
0T072885
Hi. Add new ideas$) In our boat this is work fine)
http://www.bbcboards.net/showthread.php?t=1009399
Wishin' I was fishin'...
1990 Ranger 374v
1996 175 HP Mariner - Magnum EFI
25p Tempest - A45 model
80 lb 24v MinnKota Maxxum
Humminbird Helix 10
Humminbird Helix 7
Garmin EchoMap 106sv w/ LS
Dual 8' Power Poles
Thats what I did, I am only utilizing the steering motor and shaft. I removed the head and lower unit. I wanted to run the cord through the shaft but the plug was too large so I had to incorporate the cornfield crappie mount to externally run the cable. I can get over 360 degree rotation without the cord binding. I thought about incorporating an autopilot feature like the old Power Drive and Terrovas features with the bubble and sight glass but those were flakey at best in rough water.
2001 Mercury Optimax 225
0T344965
2000 Mercury ELPTO 125
0T072885
Im curious how this would work with the "legacy" compass autopilot setting on the minnkota. THis is what I use VS the "advanced" mode which uses GPS. Seems to work pretty well on the troller. Wonder if it would keep the livescope on a target accurately?
From Cornfield Crappie Gear ...:
Projected pricing is as noted in post #5 of this thread ...
Availability in January 2020 ...
Rickie