Page 2 of 2 FirstFirst 12
Results 21 to 31 of 31
  1. Member
    Join Date
    Oct 2018
    Location
    Cobleskill, New York
    Posts
    153
    #21
    Quote Originally Posted by Charger396 View Post
    I didn't really consider a fury 4 as much as the revolution. I know nothing about a fury 4 but I've never been a fan of a fury 3 on any boats I've fooled with
    I have a zx225 with a bf225 on it, ive run a fury 4 24p and a 23p rev4 , fury4 is definitely better at everything on my rig, holeshot was excellent, and better handling and top speed.

  2. Member
    Join Date
    Sep 2019
    Location
    Pell City Alabama
    Posts
    71
    #22
    I found a local mercury dealer with a lot of props I can try. The fury 4, bravo, and t1 are on my list

  3. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,427
    #23
    25P Rev4 results:

    No plugs installed... Still lugged on holeshot with no bow rise. Super acceleration, tons of bow and stern lift. Great handling and steering feedback with less torque on the wheel.

    I hit the limiter at 78 mph (6150 rpms)... I need another set of PVS holes and pitch added and I think I'll really like this prop. I sure wish they offered these in a 27P.

    This 25P turns like a 25P at 10% slip... Does not turn like a 1-2 pitch taller prop on my rig like others say. Compared to a Bravo1 it does, But that's not a fair comparison.
    Last edited by 21XDC; 10-20-2019 at 07:39 PM.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  4. Member
    Join Date
    Sep 2019
    Location
    Pell City Alabama
    Posts
    71
    #24
    That's weird. My 25 tempest has a lot of cup added and the 23 rev 4 only turned maybe 50 rpm more on top.

  5. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,427
    #25
    One more thing.. I have never had any other prop rattle/vibration the hub until I idled with this prop. I hope that adding another set of PVS holes will help... Just a touch of throttle and it goes away. This prop really grips the water and wont slip.
    Last edited by 21XDC; 10-21-2019 at 04:17 AM.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  6. Member
    Join Date
    Sep 2019
    Location
    Pell City Alabama
    Posts
    71
    #26
    Have you ran a fury 4? If so how do they compare?

  7. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,427
    #27
    Quote Originally Posted by Charger396 View Post
    Have you ran a fury 4? If so how do they compare?
    Did you miss reading post #10?

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  8. Member
    Join Date
    Sep 2019
    Location
    Pell City Alabama
    Posts
    71
    #28
    Alright. I see you ran it and didn't like it much. Not much of a comparison but I guess that'll do.

  9. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,427
    #29
    It’s hard to compare them, unless you run them back to back. Otherwise, it’s not a fair comparison.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  10. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,427
    #30
    I shipped the prop to Mark for an extra set of PVS holes and more pitch to be added.... He will get it on Monday/Tomorrow.... But he is leaving for his annual hunting trip on Teusday.. I hope to test it again before the weather sets in...

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  11. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    63,427
    #31
    I have had the prop back for a while... Looks like I won't get a chance to try it in 2019. I'm thinking I will either be on the limiter at 81, Or get off the limiter at 80ish. Come on early spring...

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

Page 2 of 2 FirstFirst 12