Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Apr 2012
    Location
    Moss Bluff, LA
    Posts
    206

    Neon "Ride with a Legend" Light

    Has anyone attempted to take this light apart and put LED strips in it? Also, does anyone know off hand what size rivets are used? I'd like the have the rivets on hand before I drill them out to check connections on the back. It doesn't seem worth it to buy 2 new ones at 120 a piece just to have them fail in a few years.

  2. Member
    Join Date
    Apr 2018
    Location
    Fort Worth TX
    Posts
    137
    #2
    I have also thought about this but haven't had time to do anything with it

  3. Member
    Join Date
    Sep 2014
    Location
    Lufkin Tx
    Posts
    264
    #3
    I've got the same question and problem... I've heard about people doing it, but scared of the rivet part as well!
    2011 Legend Alpha 211 DC
    250 Pro XS
    Solix 10 G2 MSI & Onix 10 NT
    Elite 9 Ti2 connected to
    Motorguide Xi5 105

  4. Member
    Join Date
    Apr 2012
    Location
    Moss Bluff, LA
    Posts
    206
    #4
    Took one of mine off today to look, and its doable, but there is what looks like to be a 2 part epoxy poured over the whole display from the back. It did not want to come off, and the light housing is very thin, so I was afraid to break it.

    If someone could figure out how to chip away at the epoxy, there is plenty of room to mount a led strip or two under it.