Results 1 to 2 of 2
  1. 09-30-2019, 10:41 AM #1
    Charger396
    Charger396 is offline
    Member
    Join Date
    Sep 2019
    Location
    Pell City Alabama
    Posts
    71

    Powertech ofx3 ofs3 opinion

    Has anyone ran a powertech ofx3 or ofs3 on a bass boat? I have a 225 honda on my charger 396 and the gearcase has a larger diameter than other lowers and it was suggested to try a larger diameter prop. I'm currently running a 25 tempest plus at 65-66 mph, 6000 rpm at any height I set the jackplate and at any load from normal to very heavy. A 650 pound load difference but same speed and rpm. The higher I go the better the holeshot and easier it drives at speed
    Reply With Quote Reply With Quote
  2. Charger396
    Charger396 is offline
    Member
    Join Date
    Sep 2019
    Location
    Pell City Alabama
    Posts
    71
    #2 09-30-2019, 10:46 AM
    Forgot to add that the hull runs very similar to my 20xd bullet in that it likes neutral trim and flat. On my trim gauge im about 5/8 trim any farther and I lose speed
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »