Thread: Image confusion

Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Mar 2019
    Location
    Brookhaven, MS
    Posts
    43

    Image confusion

    please help me interpret the image. It wont change on any color pallet
    Attached Images Attached Images

  2. Member
    Join Date
    Nov 2013
    Location
    Norway
    Posts
    3,673
    #2
    Your transducer might be about to die. make sure it is properly connected to the unit and inspect the transducer for visual damage.

  3. Member
    Join Date
    May 2018
    Location
    Rochester, MN
    Posts
    1,014
    #3
    Do you have structure overlay turned on?
    2016 Ranger 1850 LS Reata / Merc 150 4s / SmartCraft / Lowrance HDS Carbon SS3D

  4. Member
    Join Date
    Mar 2019
    Location
    Brookhaven, MS
    Posts
    43
    #4
    I turned it on and off. No change.

  5. Member
    Join Date
    Nov 2019
    Location
    Quebec
    Posts
    3
    #5
    I'm not an expert, my HDS 9 Gen 3 with a Totalscan transducer did almost the same.... About the same image as yours and freeze.... Until I realized to set it right. In the sonar menu, you have to set it : shallow water = up to 100 fts, general = up to 300 fts and deep water = up to 1000 fts. Hope this will help. Sorry if you already know that stuff.