Replaced cranking battery- now the tilt trim relays just buzz, ignition will beep 1 time but motor will not turn over- smartcraft gauge will not light up (no data showing) all other electronics, lights, bilge, etc.. all work.
I have used a volt meter to run thru the wiring and have 12.7v at new battery, 12.7 at the breaker, 12.6 at the ignition, 12.6 at the starter solenoid, have checked the 5 fuses on the motor and checked voltage at the fuses-12.6 volts all thru the boat and motor but nothing. I have swapped the tilt trim relays, I know I'm missing something simple just can't figure it out any help would be appreciated.
Shift is in neutral and kill switch is installed.