Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
anyone noticing this to be worse than before? I've updated my 3 onyxes and notice that if i go shallower than 3-4 ft it looses depth and says it is 300+ft deep. I've set the depth scale to manual and th bottom is where it should be but the number goes out of whack. Didn't have this problem with previous versions.
Glad I'm not the only Onix user with follow the contour issues. Mine originally worked fine (most of the time) but after installing 3.300 I had couldn't get follow the contour to work at all. Tried resetting the unit and still had problems. Was concerned 3.300 was going to be the last update and was going to be stuck with the issues. Please to see they released another update and I'm hoping 3.350 fixes these issues. Will find when the boat comes out of storage this spring.
Do not use 83 kHz in less than 15'. That may help.
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL