Thread: 2004 Outlaw

Results 1 to 14 of 14
  1. #1
    Member
    Join Date
    Feb 2012
    Location
    Ama
    Posts
    28

    2004 Outlaw

    I took everyone's advice and waited for that new 200 Pro XS. The 6 months of agony I endured seems to be well worth the wait. So here's the numbers so far. 74.6 at 5740 rpm against a 10 mph wind in 95 degrees temps. Needless to say the motors a beast. I know from past experience if I throw a 3 blade on there it will definitely pump out another 3 or 4 mph.

  2. Member
    Join Date
    Aug 2008
    Location
    Green Cove Springs, FL
    Posts
    2,163
    #2
    Impressive numbers for just starting out! My outlaw prior to poles with a 200 opti pro xs ran a best of 74.9 with a worked 27 tempest. How’s the holeshot?

  3. Member
    Join Date
    Feb 2012
    Location
    Ama
    Posts
    28
    #3
    Hole shot is awesome

  4. Member
    Join Date
    Aug 2008
    Location
    Green Cove Springs, FL
    Posts
    2,163
    #4
    Great! Can you upload some pics? Very few G’s with the new Mercs on them.

  5. Member
    Join Date
    Feb 2012
    Location
    Ama
    Posts
    28
    #5
    Will have to figure out how to.

  6. Member
    Join Date
    Feb 2012
    Location
    Ama
    Posts
    28
    #6
    Quote Originally Posted by deltamaster View Post
    Will have to figure out how to.
    New numbers I add almost got it dialed in. It cooled down in temps I tried turning a 3 blade fury 5700 @77.5

  7. Member
    Join Date
    Jul 2006
    Location
    Florida
    Posts
    285
    #7
    What pitch is your 3 blade Fury? Those are great numbers for a 200hp.

  8. Major Flagelator Gamblinman's Avatar
    Join Date
    Jun 2004
    Location
    Yantis, TX
    Posts
    4,121
    #8
    A worked Tempest will make that boat fly. I like Fury's, but that alloy they make them from is too hard to work without a lot of heat.
    "Better to remain silent and be thought a fool than to speak out and remove all doubt."

  9. Member
    Join Date
    Aug 2008
    Location
    Green Cove Springs, FL
    Posts
    2,163
    #9
    Are you running poles on that boat??

  10. Member
    Join Date
    Feb 2012
    Location
    Ama
    Posts
    28
    #10
    26 fury 3 blade no poles

  11. Member
    Join Date
    Nov 2019
    Location
    Ocala, FL
    Posts
    1
    #11
    3.0 200 runnin 77 two people light load 26p fury

  12. Member
    Join Date
    Feb 2012
    Location
    Ama
    Posts
    28
    #12

    Pics

    Hope I got this right.
    Attached Images Attached Images

  13. Member
    Join Date
    Jul 2012
    Location
    Washington State
    Posts
    5
    #13
    Amazing set up! Thanks for sharing

  14. Member
    Join Date
    Aug 2008
    Location
    Green Cove Springs, FL
    Posts
    2,163
    #14
    Nice! Looks good! That’s running 2 mph faster than the same setup with an Optimax!