Results 1 to 14 of 14
  1. #1
    Member
    Join Date
    May 2017
    Location
    Clarksville TN
    Posts
    191

    Livescope with 2 Echomap plus units.

    I am currently hooking up Livescope in my boat and I have an Echomap plus 93SV and a 73SV. Can anyone point me in the right direction to where I can get my units talking again? Livescope made me unplug my ethernet cable between the two.

    Thanks,
    Ray

  2. Banned
    Join Date
    Oct 2008
    Location
    Texas
    Posts
    5,356
    #2
    you need a black box to network

  3. Member
    Join Date
    May 2017
    Location
    Clarksville TN
    Posts
    191
    #3
    When I go on their site, there is about 6 black boxes.

  4. Member
    Join Date
    Dec 2012
    Location
    Central Arkansas
    Posts
    196

  5. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    33,096
    #5
    GMS 10 will get the job done.....all you need to do is run power to the power cord and plug your e-net cables to the box and thats it.
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS

  6. Member
    Join Date
    May 2017
    Location
    Clarksville TN
    Posts
    191
    #6
    Ok thank you, just scored one for a great deal.

  7. Member
    Join Date
    Nov 2018
    Location
    Canada
    Posts
    165
    #7
    I am using a cheap 4 ports desktop switch + standard Ethernet cable (no need crossover cable at all), super good and stable. all you need to pay attention is put the switch under console or the place has no water in, and for the Ethernet cable, you need purchase Garmin Marine Network Cable Connectors install on one of the end of the cable to connect 93sv
    Tangrine Orange Key 16604126S1

  8. Member
    Join Date
    May 2017
    Location
    Clarksville TN
    Posts
    191
    #8
    Ok have an update hopefully someone can help me out. I got a GMS-10 Box for a great deal from ebay. I ran a wire to my cranking battery and plugged the power cable into the box and nothing is lighting up. The power LED doesnt light up. I called garmin and they said I should check with a volt meter and see if the cable is bad. The cable has 13v's running to the end of the power cable. With those who have the box, when you put your power cable into the box does anything light up? I think my GMS 10 box is bad. Thanks for any help

  9. Member
    Join Date
    May 2017
    Location
    Clarksville TN
    Posts
    191
    #9
    Quote Originally Posted by canon View Post
    I am using a cheap 4 ports desktop switch + standard Ethernet cable (no need crossover cable at all), super good and stable. all you need to pay attention is put the switch under console or the place has no water in, and for the Ethernet cable, you need purchase Garmin Marine Network Cable Connectors install on one of the end of the cable to connect 93sv
    Live scope will work with this?

  10. Member
    Join Date
    Aug 2012
    Location
    Fontana, NC
    Posts
    5,481
    #10
    This is a sometimes thing. I've seen it work and see it not work. One thing to consider is if you have trouble on your network you'll be out of luck with Garmin Tech Support.
    My wife asks if I'm going to fish every day. I can't fish every day. Some days I might be sick.

  11. Member
    Join Date
    Nov 2018
    Location
    Canada
    Posts
    165
    #11
    Quote Originally Posted by G3Ray View Post
    Live scope will work with this?
    yes, working perfectly on both two EM+ units.
    Tangrine Orange Key 16604126S1

  12. Member thomasfouraker's Avatar
    Join Date
    Jun 2008
    Location
    Jacksonville
    Posts
    1,223
    #12
    Quote Originally Posted by canon View Post
    yes, working perfectly on both two EM+ units.
    Does the switch need a power source?
    2001 Mercury Optimax 225
    0T344965
    2000 Mercury ELPTO 125
    0T072885

  13. Member MonteSS's Avatar
    Join Date
    Aug 2011
    Location
    Central Virginia
    Posts
    3,231
    #13
    Black box might not show power until the head unit talks to it and turns it on. Otherwise it would drain the battery.

  14. Member
    Join Date
    Nov 2018
    Location
    Canada
    Posts
    165
    #14
    Quote Originally Posted by thomasfouraker View Post
    Does the switch need a power source?
    yes, PM sent
    Tangrine Orange Key 16604126S1