have 92 ...361v and theres 5 wires coming from the trailer and it was hooked up to
a flat 4 plug. need to redo that flat 4 there not in good shape . is there a diagram to show me which wire goes where?
5 wires to a flat 4 basicly . thx
have 92 ...361v and theres 5 wires coming from the trailer and it was hooked up to
a flat 4 plug. need to redo that flat 4 there not in good shape . is there a diagram to show me which wire goes where?
5 wires to a flat 4 basicly . thx
White wire is ground, green wire is right turn signal/brake, yellow is left turn signal/brake, and the brown wire is your running lights, tail lights and license plate light. Just go on Google images and type in "4 pin trailer wiring diagram". Tons of them available.
1998 Ranger R93
1998 Mercury 200 EFI
"Life, liberty, and the pursuit of happiness."
92....361v .ok....got that part...i got 5 wires coming from the trailer, one is for electric brake,think blue.(not using it) but i have a white
coming from the trailer, can i tie that wire and the white wire coming from the plug together and ground them all.?
If you have a blue wire on the trailer, it should be "brake solenoid (release) / reverse lights". Follow the white wire on the trailer, it should go to ground, perhaps a bolt.
Ground from truck (white wire) to ground on trailer (white wire)
Reply With Quote