i have a chance to by an 07 etech 225. i have on my boat a 98 evinrude 200 will i need to change out controls and cables what will work.
i have a chance to by an 07 etech 225. i have on my boat a 98 evinrude 200 will i need to change out controls and cables what will work.
QUIT WISHING AND GO FISHING🐟
08 skeeter I class 08 yahama 250 98 HYDRASPORT 205 98 EVINRUDE 200 to many other boats to list
No, will be plug and play you will need to prime the oil pump and I'd set it to Breakin mode.
how do i prime oil pump and set break in mode thank you for replying
QUIT WISHING AND GO FISHING🐟
08 skeeter I class 08 yahama 250 98 HYDRASPORT 205 98 EVINRUDE 200 to many other boats to list
You'll need Evinrude diagnostics to set to break in and you squeeze the hell out of the oil tank primer bulb to make sure all the oil lines are full of oil. If unsure have a dealership perform the task for you.
thank you
QUIT WISHING AND GO FISHING🐟
08 skeeter I class 08 yahama 250 98 HYDRASPORT 205 98 EVINRUDE 200 to many other boats to list
this is a later installation guide but it should help you with the initial rigging. As was mentioned, have a dealer check over everything, prime the oil system, and do the startup of the motor and final adjustments for you
http://www.operatorsguides.brp.com/O...5008506_EN.pdf
-----
A Technical troubleshooter possessing more tools than talent !
thank you. you are the man
QUIT WISHING AND GO FISHING🐟
08 skeeter I class 08 yahama 250 98 HYDRASPORT 205 98 EVINRUDE 200 to many other boats to list