I have an 02 175 hp Optimax OT567335 and trying to find the right plugs. I think I need PZFR5F but then some show 11 and some say Iridium and some say Platinum. Very confusing for my simple mind. Any help would be appreciated. Thanks!
I have an 02 175 hp Optimax OT567335 and trying to find the right plugs. I think I need PZFR5F but then some show 11 and some say Iridium and some say Platinum. Very confusing for my simple mind. Any help would be appreciated. Thanks!
The -11 is for plugs that are pre-gapped to 1.1 mm. Pretty sure you need Iridium plugs.
Mercury 2002 200hp Carbed Saltwater
OT566776
2002 Cape Horn 22' Bay
IZFR5G, gapped at .032-.033" (and torqued to 20 lbs/ft).
See also the FAQ section.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
I'll echo Don with one add, IZFR5G ONLY, gapped .032" - .033". All of this can be found the great FAQs at top of this and the 3L forum much of which applies to all Optimax engines regardless of displacement.
Oil, Battery, Spark Plugs, Fuel and Fuel Additive Recommendations
Importance of Proper Spark Plug Gap
DON'T use Aftermarket Spark Plugs in your Opti!
Recommended Annual Maintenance or Winterization for Optimax Engines
_______
Phil
'09 Hewescraft ProV
'09 150 Optimax
Thanks guys! I actually read the FAQs several times but for some reason I kept seeing or using a P instead of an I. Don't know whether to blame it on my eyesight or my reading comprehension. Thanks again guys