Trailer question

[truevolfan]

I have a 2000 nitro 929 and not happy with the trailer. It's to short for the boat. I found a nice condition trailer from a 91 stratos 201. My question is how do I measure it to determine if my boat will fit on that trailer. I'm sure length is probably fine, more concerned on width. Thanks for any input

[bill.s]

Width should be easy. I'd measure the inside width of the rear bunks right above the steps near the stern on your current trailer and compare that same measurement on the new trailer. My boat has these maybe 4-6" per side away from the hull. If you have a stepped hull, I would also look at the old vs the new long bunk board placement.