I have not experienced any problems on my console units with 19.1 running an LSS2 and now a 3in1. The bow unit with HDI on the trolling motor is another story though as downscan is broken.
I have not experienced any problems on my console units with 19.1 running an LSS2 and now a 3in1. The bow unit with HDI on the trolling motor is another story though as downscan is broken.
I'm in the same situation with downscan/HDI. Has anyone been able to find a workaround or are we all still waiting on Lowrance to acknowledge and fix the problem?Originally Posted by billwvu05
Lake&Bay Boca
SHO
Roll back the software to 18.3 is the only solution I found.
What is the procedure for rolling back to a previous version? I have the previous versions (thanks to all that posted them in one form or another!!).
Kevin | 2000 Champion 191 | 2000 Yamaha OX66 200hp
open the Storage tab, go to whatever card you have the software installed on and select the file. Follow the menu from there, super easy.
Lake&Bay Boca
SHO
TY sir!
Kevin | 2000 Champion 191 | 2000 Yamaha OX66 200hp
Bill - which 18.3 did you roll back to? There are (3) - 61.1.123, .133, and .155. The HDI issue started with .133, I believe, and .155 made it worse.
I will check tonight when I get home, not sure which one I am running now.
I can confirm I am running 61.1.123 with no issues. Have not either of the other two 18.3 versions.
One issue that has cropped up lately for some reason is getting bottom lock on my 3 and 1 and 2d for my console units. I typically lose bottom lock when i get above 20 mph or so and it returns once I come off of plane. Lately though I am having to restart my "main" console unit to reaquire the bottom after stopping to fish. It gets a little annoying to say the least.
Reply With Quote