I have a 34 P3 for sale. I thought I would give everyone here first crack at it since I had it worked for an XB21.
It was worked by Matt at Performance Propeller in Longview, TX. It is an RL cut on a performer 3. The blades look similar to my ET's, but have more overall blade surface to carry the boat. I bought the prop with the cut done and Matt worked it until it ran over 100.
$700 shipped.
I ran it with a 300XS (1.62's) and it ran 101 at 5600. I tried it two times on the DBR 300XS chasing bigger numbers. One time in Texas as a wave cutter prop with Jay chasing me down. Ran 97 in some nasty stuff that day. The other time was Minnesota and it ran 102 with the DBR. On the 300R I took it 102 with room to go. It's a great wheel for a guy who wants a big number wheel, but expect it to run like a big wheel on a stock motor.
With the 300XS, all testing was done ready to tournament fish with power poles. Jay ran it on a XB21 2+2 250XS with 1.75's to 94.
I'm only selling because I want to go bigger.
Here is a speed and distance graph of a 101 pass on the R.
5-85 in 22 seconds in 1570'
5-100 in 39.4 seconds in 3913'
5-101 in 43.43 seconds in 4487'
Video of 101 pass with R.
IMG_9931.jpg
p3 graph.JPG
IMG_5754.jpg
IMG_5755.jpg
IMG_5756.jpg
Reply With Quote
